COCONUTS MASTER REFIT LIST (MAJORS)
2009/2010 and 2012/2013
Work done with new components and in years indicated above unless otherwise stated below. All work was performed in accordance with American Boat & Yacht Council Standards at Zimmerman, Deltaville Boat Yard, and Atlantic Yacht Basin. Some small items were done by the owner.
DRIVE TRAIN UPGRADES and MAJOR MAINTENANCE
2000 hr service on Caterpillar 3126TA 420hp main engines. (2012)
3000 hr service on Caterpillar 3126TA 420hp main engines. (2015)
4000 hr service on Caterpillar 3126TA 420hp main engines. (2018)
Installed block heaters on both engines (safety upgrade)
Installed total new USCG rollover “can type” exhaust on port engine (safety upgrade)
Installed Borel “hi-temperature exhaust” alarms (safety upgrade)
Removed, cleaned, greased and reinstalled constant velocity shafts
Replaced 1996 Aquadrive thrust bearing for main propulsion shafts with 2010 Aquadrive units
Installed new Tides Sure Seals for drive shafts
Replaced shafts with new Aquamet 22 stainless steel 2” drive shafts both engines (safety upgrade)
Removed struts, laser aligned new positions, reinstalled struts and installed cutlass bearings
Installed ProProtector disc cutters both shafts (safety upgrade)
Replaced props with Michigan Wheel Dyna-Quad 26 x 22 Nibral props (2011)
Replaced Berry Motor Mounts both main engines (2013)
Removed and balanced props by Wildcat Propellers in Chesapeake, VA (2017)
FUEL STORAGE, FILTRATION, AND DELIVERY UPGRADES
Cleaned both 300 gal fuel tanks with high pressure steam (safety action)
Replaced sight tube hoses with CLEARFLO fuel grade transparent yellow tubing
Installed fuel stripper tubes to permit quick draining of condensate as necessary (convenience upgrade)
Installed Wiki filter vacuum gages on both Racor main engine primary fuel filters (safety upgrade)
Installed Wiki filter vacuum gage on Racor genset primary fuel filter (safety upgrade)
Installed Algae-X filters to both port and starboard main engine fuel filter systems
Installed UL listed correct Racor filter bowl drains (safety upgrade)
Installed water sensors both Racor filter bowls (safety upgrade)
Installed Borel “water in fuel” alarms (safety upgrade)
Replaced fuel supply hoses (2015)
ENGINE ROOM MODIFICATIONS AND UPGRADES
Replaced both main engines thru hulls and seacocks (safety upgrade)
Installed proper thru hulls with seacocks for generator (safety upgrade)
Upgraded Sea Fire FM-200 suppression system and added remote pull station in PH (2018) (safety upgrade)
Installed MARCO oil changer system for engines and generator
Installed drain shut off valves on main engine oil pans (2015) (safety upgrade)
Installed drain valves with safety plugs on port and starboard Twin Disc transmissions (2015)
Installed grounded 110 v receptacle
Cleaned fresh water tanks
Installed brightly polished diamond plate deck between engines (2014)
Replaced port side engine room blowers with two Attwood Turbo 4000 blowers (2015)
Replaced starboard side engine room blower with one Jabsco 250 cfm blower (2015
Replaced fluorescent fixtures with five - 50 LED light fixtures (2017)
ELECTRONICS & NAVIGATION SYSTEMS
Installed NMEA 2000 backbone
Installed Furuno 3D NavNet electronics suite - MFD 12 in Pilothouse & MFD 8 in Flybridge
Installed Furuno FI-50 “head up” depth display in PH & FB
Installed Simrad 28 autopilot in PH and FB
Installed Simrad WR10 Wireless Autopilot Controller and BT-1 Bluetooth Base Station (2018)
Installed Interphase forward looking sonar PH & FB
Installed KVH M3 active satellite antenna system
Installed WiFi system
Installed Airmar PB200 weather station and Furuno GPS antennae
Installed four Digital antennas
Installed AIS Class B transceiver system (relocated and replaced antenna 2017)
12V DC AND 120V AC POWER SUPPLY SYSTEMS
Replaced Westerbeke genset with new Northern Lights 12kw generator
Fabricated stainless steel battery racks and installed under salon: two each outboard of both port and starboard mufflers for improved balance and increased storage space
Replaced four Deka 8D AGM 245 Amp-hr house batteries (2018)
Replaced wet cell start and bow thruster batteries with four Deka 8D and Group 25 AGM’s (2015)
Relocated four old battery switches from engine room to galley (safety upgrade)
Replaced these above with Blue Sea Dual Circuit Plus 5511 rotary/combiner switches for house bank; port and starboard engine start, and generator start batteries
Upgraded and upsized all charging and battery cabling (safety upgrade)
Upgraded over current protection (safety upgrade)
Installed grounded 110v receptacle in flybridge
Replaced 50 Amp 70’ shore power cable (2014) (safety upgrade)
Purchased additional 50 Amp 30’ shore power extension cable
POWER MANAGEMENT SYSTEMS
Replaced old Xantrex inverter charger w/ Mastervolt Mass Combi 4000 watt inverter/charger (2010)
Installed Mass Combi remote LCD control panel in galley
Installed Blue Seas 8235 digital voltmeter monitoring port, starboard, and genset start batteries
Installed 210 amp Balmar alternator on each main engine
Installed Balmar 12v management system centerfielder and two regulators
Installed Three (3) Magnum Electronic Smart Battery Combiners (2014)
Installed Blue Seas Systems Safety Hub 150 Fuse Block (2014) (safety upgrade)
HULL REPAIRS AND UPGRADES
Removed existing bottom paint to bare hull and applied 10 mils (5 coats) Interlux 2000e epoxy barrier coat
Repaired bow thruster tube and hull fairing
Installed Groco strake style exterior thru hull strainers with hinged clean outs
Installed proper thru hull with seacock for black water discharge (safety upgrade)
Repaired and professionally polished AWLGRIP Flag Blue paint (2017)
Painted boot stripe red
AUXILIARY MACHINE ROOM UPGRADES
Forward Machinery Room No. 1 (under MSR)
Fabricated/installed bow thruster motor support under MSR (safety upgrade)
Repaired holding tank and installed second air vent (2011)
Replaced 1000 GPH shower sump pump and float switch (2017)
Installed LED local lighting over shower sump (2018)
Refurbished florescent fixture (2018)
Cleaned and painted bilge
Aft Machinery Room No. 2 (under GSR)
Replaced water heater with Wabasto 11 gal water heater including engine water heat exchanger
Installed bronze shutoff valves each side of A/C sea water strainer (convenience upgrade)
Replaced A/C sea water distribution manifold
Replaced A/C sea water pump (2015)
Re-plumbed two condensate drip hoses to drain overboard to assure dry bilges
Replaced fluorescent fixture under GSR with one - 36 LED light fixture (2018)
Battery Room (under salon)
Fabricated and installed stainless steel 8D battery racks; two each outboard of both port and starboard mufflers for increased storage and improved balance (comfort upgrade)
Fabricated and installed stainless steel supports for both main engine mufflers (safety upgrade)
Repaired and painted both main engine mufflers
Replaced fluorescent fixture with two - 36 LED light fixtures (2018)
Cleaned and painted bilge (2018)
Lazarette
Installed new oversized Accusteer hydraulic pump for autopilot (safety upgrade)
Installed new trim tab hydraulic hoses and actuator switches
Replaced generator rear access panel on bulkhead under salon
Replaced fluorescent fixture with one - 50 LED light fixture (2018)
Replaced both deck drain hoses (2018)
Cleaned and painted bilge (2018)
ANTI-FLOODING SYSTEMS
Replaced two 1,500 GPH bilge pumps with two 3,700 GPH Rule “CRASH” pumps (safety upgrade)
[upgrade included larger 12v wiring/fuses, larger discharge hoses, and larger through hulls/seacocks]
Replaced 1500 GPH bilge pump and float switch adjacent washer/dryer (2016)
Replaced 1500 GPH bilge pump and hose in lazarette (2018)
SANITARY SYSTEMS
Serviced Vacuflush waste system
Replaced “empty” float sensor in holding tank
Replaced master head and guest head flush valves (2018)
Replaced duck bill valves both heads (2018)
Replaced guest head Vacuflush motor (2018)
DECK & DECKHOUSE UPGRADES
Removed varnish on teak cockpit deck, sanded, and refurbished surface
Replaced teak name boards
Polished deck house and stainless steel handrail
Re-stitched Bimini and installed FB cover
Replaced numerous pop rivets that tightened Bimini frame (2018)
Stripped and refinished all bright work, including teak transom
Installed Ultra Anchor UA 27 60 lb stainless steel anchor
Replaced anchor rode and ground tackle w/ 200’ 3/8” ACCO G4 chain and 100’ 1” line (safety upgrade)
Installed foot switches for windlass operation on foredeck (safety upgrade)
Installed anchor pulpit chafe gear
Installed quick disconnect fitting on sea water wash down on foredeck
Replaced sea water wash down solenoid pump switch (2015)
Installed fresh water wash down with quick disconnect fitting on foredeck
Replaced six ¾” dock lines
FLYBRIDGE & AFT DECK UPGRADES
Removed varnish on teak fly bridge deck, sanded, and refurbished surface
Replaced settee and captain seat cushions
Replaced trim tab actuator switch
Installed LED spreader lights and LED anchor light
Repainted non-skid on forward and side decks (2014)
Replaced port and starboard nav light lenses, housing, and bulbs (2016)
Purchased Viking valise type 6 person life raft (2013) (safety upgrade)
Prepped and painted mast; rewired mast
Refurbished dinghy davit and replaced hoist motor, cable, and controls
CABIN UPGRADES
Installed 8 First Alert smoke/CO detectors (safety upgrade)
Installed new carpet in saloon, PH, MSR, and GSR
Removed, executed necessary repairs, and re-bed all ten portholes (2017)
Salon
Replaced A/C fan motor
Replaced curtains and settee cushions
Modified salon breakfront for bar with glass and bottle storage
Installed flat screen TV
Installed Phantom Door Screen
Galley
Replaced microwave (2018)
Modified cabinetry in galley to create a six (6) cubic foot pantry behind new flat screen TV
Installed spice rack, two cup holders, and glass rack in galley
Replaced galley sink hot/cold valves and handles (2018)
Master and Guest Staterooms
Replaced fabric on GSR settee cushions
Replaced A/C fan motor
Replaced drain solenoid switch on washer/dryer
Replaced lid switch on washer/dryer
Pilot House
Installed teak book rack, binocular holder, and cup holder
Replaced settee cushions
Replaced trim tab actuator switch
Repaired Tank Tender unit and replaced pneumatic lines
Installed EPIRB (safety upgrade)
Installed Weem’s and Plath ship’s clock and barometer
2009/2010 and 2012/2013
Work done with new components and in years indicated above unless otherwise stated below. All work was performed in accordance with American Boat & Yacht Council Standards at Zimmerman, Deltaville Boat Yard, and Atlantic Yacht Basin. Some small items were done by the owner.
DRIVE TRAIN UPGRADES and MAJOR MAINTENANCE
2000 hr service on Caterpillar 3126TA 420hp main engines. (2012)
3000 hr service on Caterpillar 3126TA 420hp main engines. (2015)
4000 hr service on Caterpillar 3126TA 420hp main engines. (2018)
Installed block heaters on both engines (safety upgrade)
Installed total new USCG rollover “can type” exhaust on port engine (safety upgrade)
Installed Borel “hi-temperature exhaust” alarms (safety upgrade)
Removed, cleaned, greased and reinstalled constant velocity shafts
Replaced 1996 Aquadrive thrust bearing for main propulsion shafts with 2010 Aquadrive units
Installed new Tides Sure Seals for drive shafts
Replaced shafts with new Aquamet 22 stainless steel 2” drive shafts both engines (safety upgrade)
Removed struts, laser aligned new positions, reinstalled struts and installed cutlass bearings
Installed ProProtector disc cutters both shafts (safety upgrade)
Replaced props with Michigan Wheel Dyna-Quad 26 x 22 Nibral props (2011)
Replaced Berry Motor Mounts both main engines (2013)
Removed and balanced props by Wildcat Propellers in Chesapeake, VA (2017)
FUEL STORAGE, FILTRATION, AND DELIVERY UPGRADES
Cleaned both 300 gal fuel tanks with high pressure steam (safety action)
Replaced sight tube hoses with CLEARFLO fuel grade transparent yellow tubing
Installed fuel stripper tubes to permit quick draining of condensate as necessary (convenience upgrade)
Installed Wiki filter vacuum gages on both Racor main engine primary fuel filters (safety upgrade)
Installed Wiki filter vacuum gage on Racor genset primary fuel filter (safety upgrade)
Installed Algae-X filters to both port and starboard main engine fuel filter systems
Installed UL listed correct Racor filter bowl drains (safety upgrade)
Installed water sensors both Racor filter bowls (safety upgrade)
Installed Borel “water in fuel” alarms (safety upgrade)
Replaced fuel supply hoses (2015)
ENGINE ROOM MODIFICATIONS AND UPGRADES
Replaced both main engines thru hulls and seacocks (safety upgrade)
Installed proper thru hulls with seacocks for generator (safety upgrade)
Upgraded Sea Fire FM-200 suppression system and added remote pull station in PH (2018) (safety upgrade)
Installed MARCO oil changer system for engines and generator
Installed drain shut off valves on main engine oil pans (2015) (safety upgrade)
Installed drain valves with safety plugs on port and starboard Twin Disc transmissions (2015)
Installed grounded 110 v receptacle
Cleaned fresh water tanks
Installed brightly polished diamond plate deck between engines (2014)
Replaced port side engine room blowers with two Attwood Turbo 4000 blowers (2015)
Replaced starboard side engine room blower with one Jabsco 250 cfm blower (2015
Replaced fluorescent fixtures with five - 50 LED light fixtures (2017)
ELECTRONICS & NAVIGATION SYSTEMS
Installed NMEA 2000 backbone
Installed Furuno 3D NavNet electronics suite - MFD 12 in Pilothouse & MFD 8 in Flybridge
Installed Furuno FI-50 “head up” depth display in PH & FB
Installed Simrad 28 autopilot in PH and FB
Installed Simrad WR10 Wireless Autopilot Controller and BT-1 Bluetooth Base Station (2018)
Installed Interphase forward looking sonar PH & FB
Installed KVH M3 active satellite antenna system
Installed WiFi system
Installed Airmar PB200 weather station and Furuno GPS antennae
Installed four Digital antennas
Installed AIS Class B transceiver system (relocated and replaced antenna 2017)
12V DC AND 120V AC POWER SUPPLY SYSTEMS
Replaced Westerbeke genset with new Northern Lights 12kw generator
Fabricated stainless steel battery racks and installed under salon: two each outboard of both port and starboard mufflers for improved balance and increased storage space
Replaced four Deka 8D AGM 245 Amp-hr house batteries (2018)
Replaced wet cell start and bow thruster batteries with four Deka 8D and Group 25 AGM’s (2015)
Relocated four old battery switches from engine room to galley (safety upgrade)
Replaced these above with Blue Sea Dual Circuit Plus 5511 rotary/combiner switches for house bank; port and starboard engine start, and generator start batteries
Upgraded and upsized all charging and battery cabling (safety upgrade)
Upgraded over current protection (safety upgrade)
Installed grounded 110v receptacle in flybridge
Replaced 50 Amp 70’ shore power cable (2014) (safety upgrade)
Purchased additional 50 Amp 30’ shore power extension cable
POWER MANAGEMENT SYSTEMS
Replaced old Xantrex inverter charger w/ Mastervolt Mass Combi 4000 watt inverter/charger (2010)
Installed Mass Combi remote LCD control panel in galley
Installed Blue Seas 8235 digital voltmeter monitoring port, starboard, and genset start batteries
Installed 210 amp Balmar alternator on each main engine
Installed Balmar 12v management system centerfielder and two regulators
Installed Three (3) Magnum Electronic Smart Battery Combiners (2014)
Installed Blue Seas Systems Safety Hub 150 Fuse Block (2014) (safety upgrade)
HULL REPAIRS AND UPGRADES
Removed existing bottom paint to bare hull and applied 10 mils (5 coats) Interlux 2000e epoxy barrier coat
Repaired bow thruster tube and hull fairing
Installed Groco strake style exterior thru hull strainers with hinged clean outs
Installed proper thru hull with seacock for black water discharge (safety upgrade)
Repaired and professionally polished AWLGRIP Flag Blue paint (2017)
Painted boot stripe red
AUXILIARY MACHINE ROOM UPGRADES
Forward Machinery Room No. 1 (under MSR)
Fabricated/installed bow thruster motor support under MSR (safety upgrade)
Repaired holding tank and installed second air vent (2011)
Replaced 1000 GPH shower sump pump and float switch (2017)
Installed LED local lighting over shower sump (2018)
Refurbished florescent fixture (2018)
Cleaned and painted bilge
Aft Machinery Room No. 2 (under GSR)
Replaced water heater with Wabasto 11 gal water heater including engine water heat exchanger
Installed bronze shutoff valves each side of A/C sea water strainer (convenience upgrade)
Replaced A/C sea water distribution manifold
Replaced A/C sea water pump (2015)
Re-plumbed two condensate drip hoses to drain overboard to assure dry bilges
Replaced fluorescent fixture under GSR with one - 36 LED light fixture (2018)
Battery Room (under salon)
Fabricated and installed stainless steel 8D battery racks; two each outboard of both port and starboard mufflers for increased storage and improved balance (comfort upgrade)
Fabricated and installed stainless steel supports for both main engine mufflers (safety upgrade)
Repaired and painted both main engine mufflers
Replaced fluorescent fixture with two - 36 LED light fixtures (2018)
Cleaned and painted bilge (2018)
Lazarette
Installed new oversized Accusteer hydraulic pump for autopilot (safety upgrade)
Installed new trim tab hydraulic hoses and actuator switches
Replaced generator rear access panel on bulkhead under salon
Replaced fluorescent fixture with one - 50 LED light fixture (2018)
Replaced both deck drain hoses (2018)
Cleaned and painted bilge (2018)
ANTI-FLOODING SYSTEMS
Replaced two 1,500 GPH bilge pumps with two 3,700 GPH Rule “CRASH” pumps (safety upgrade)
[upgrade included larger 12v wiring/fuses, larger discharge hoses, and larger through hulls/seacocks]
Replaced 1500 GPH bilge pump and float switch adjacent washer/dryer (2016)
Replaced 1500 GPH bilge pump and hose in lazarette (2018)
SANITARY SYSTEMS
Serviced Vacuflush waste system
Replaced “empty” float sensor in holding tank
Replaced master head and guest head flush valves (2018)
Replaced duck bill valves both heads (2018)
Replaced guest head Vacuflush motor (2018)
DECK & DECKHOUSE UPGRADES
Removed varnish on teak cockpit deck, sanded, and refurbished surface
Replaced teak name boards
Polished deck house and stainless steel handrail
Re-stitched Bimini and installed FB cover
Replaced numerous pop rivets that tightened Bimini frame (2018)
Stripped and refinished all bright work, including teak transom
Installed Ultra Anchor UA 27 60 lb stainless steel anchor
Replaced anchor rode and ground tackle w/ 200’ 3/8” ACCO G4 chain and 100’ 1” line (safety upgrade)
Installed foot switches for windlass operation on foredeck (safety upgrade)
Installed anchor pulpit chafe gear
Installed quick disconnect fitting on sea water wash down on foredeck
Replaced sea water wash down solenoid pump switch (2015)
Installed fresh water wash down with quick disconnect fitting on foredeck
Replaced six ¾” dock lines
FLYBRIDGE & AFT DECK UPGRADES
Removed varnish on teak fly bridge deck, sanded, and refurbished surface
Replaced settee and captain seat cushions
Replaced trim tab actuator switch
Installed LED spreader lights and LED anchor light
Repainted non-skid on forward and side decks (2014)
Replaced port and starboard nav light lenses, housing, and bulbs (2016)
Purchased Viking valise type 6 person life raft (2013) (safety upgrade)
Prepped and painted mast; rewired mast
Refurbished dinghy davit and replaced hoist motor, cable, and controls
CABIN UPGRADES
Installed 8 First Alert smoke/CO detectors (safety upgrade)
Installed new carpet in saloon, PH, MSR, and GSR
Removed, executed necessary repairs, and re-bed all ten portholes (2017)
Salon
Replaced A/C fan motor
Replaced curtains and settee cushions
Modified salon breakfront for bar with glass and bottle storage
Installed flat screen TV
Installed Phantom Door Screen
Galley
Replaced microwave (2018)
Modified cabinetry in galley to create a six (6) cubic foot pantry behind new flat screen TV
Installed spice rack, two cup holders, and glass rack in galley
Replaced galley sink hot/cold valves and handles (2018)
Master and Guest Staterooms
Replaced fabric on GSR settee cushions
Replaced A/C fan motor
Replaced drain solenoid switch on washer/dryer
Replaced lid switch on washer/dryer
Pilot House
Installed teak book rack, binocular holder, and cup holder
Replaced settee cushions
Replaced trim tab actuator switch
Repaired Tank Tender unit and replaced pneumatic lines
Installed EPIRB (safety upgrade)
Installed Weem’s and Plath ship’s clock and barometer